Search
814 results found for "neon"
-
285-400222 BIG TOM - Tires Sold Out
$5.00
2 Pieces BIG TOM rubber tires and Plastic Wheels. LiteHawk BIG TOM Wheel Removal: The Front and the Rear Wheel removal is the same. Remove the screw that secures the wheel to the axles on the front or rear drive assemblies, and lift off.
-
285-1132 XXL 2 AM - Rotor Assy incl Connectors Sold Out
$3.00 $4.00
XXL 2 AM - Rotor Assy incl Connectors
-
285-2206 RANGER Propellers Sold Out
$4.00
There are two Propellers for the RANGER. They have exactly opposite pitches. They are not identical. One turns clockwise and the other is counter clockwise. They must be placed on the correct motor, to counter act each others directional torque, so that the RANGER doesn't just sit in one spot and spin. Looking at the...
-
285-3344 QUATTRO SNAP Rotor Blade Set Sold Out
$3.00
Complete replacement rotor blades (4 pieces) for your LiteHawk SNAP. Each blade has a stamped letter. White blades on the front with Red blades on the back. The blades are a friction fit, there is little wrench that comes with your SNAP. It is a blade removal tool. Fit it under the rotor blade and gently lever upwards!...
-
-
-
-
-
285-2112 CHALLENGER Connecting Rod Sold Out
$1.00 $3.00
This stainless steel Connecting Rod is the union between the Servo and the Rudder. It passes through the rear hull and is held in place by stainless steel collet and allen screws.
-
285-421021 Spur Gear Sold Out
$5.00
The Spur Gear is the big gear in the Gear Box that transitions power from the Motor and Pinion Gear to the Differential. Rear Gear Box- Differential, Spur Gear, Motor, Pinion Gear. The Gear Box is some thing that you should be removing once in a while, just for maintenance purposes. It is sealed inside...
-
-
285-1249 SWIFT Pushrods for Aileron Sold Out
$2.00 $4.00
SWIFT Aileron Pushrods are the control wires from the Servo to the Ailerons. LiteHawk SWIFT - Assembling Replacement Main Wing / Aileron Servo This DIY instruction set assumes you have ordered replacement kit "Wing w/ Servo Set" 285-1252 which includes all pieces required to build a replacement Main Wing assembly. THIS IS THE RECOMMENDED WAY...
-
285-3412 FOCUS - Replacement Upper and Lower body. Sold Out
$4.00
The Upper and Lower Body sections are held together by 16 screws, made of a tough polycarbonate plastic that houses and protects all the electronics. Hint - Before you start separating the Upper/Lower body parts, spread out a towel to work on. The screws are tiny, and this will keep them from bouncing away if you...
-
285-423024 XS - Steering Hubs(L/R ) Sold Out
$5.00
-
-
-
285-2114 CHALLENGER - Servo Set Sold Out
$10.00
This Servo Set has a bracket made to fit for the Servo in the Hull of the boat. To remove the Servo, first loosen the Allen screw holding the Servo Connection Rod at the Servo Horn. Then push the Rudder all the way to the right ( starboard ) side and push the Servo Horn...
-
285-1271 ZOOM 2 ESC 2.4 Ghz Sold Out
$15.00
Antenna not included. This ESC. has two servos on board for the rudder and elevators and can be accessed by removing the Wing. The ESC. is lightly glued into place.
-
285-1251 SWIFT Hatch Sold Out
$2.00 $7.50
The SWIFT Hatch encloses and protects the Electronics in the SWIFT Find the small tab on the front of the canopy. Gently pull it forward, the canopy will release. Install the Canopy Clip onto the right fuselage section. Be generous in your use of foam-safe CA adhesive or the adhesive of your choice to cement...
-
285-07 LiteHawk 3 Rotor Blades Set "A" Sold Out
$3.00
Rotor Blade Set "A" LITEHAWK III- Main Rotor Blade Replacement - Looking at the blades, you will see a screw that attaches the blade to the blade grip. Unscrew this screw and remove the blade. Take special care that you don't misplace these special screws, they are the longest on the Heli'. -...
