Description
This LiteHawk RUMBLER is a one piece replacement with every thing attached. Ready to run. Motors, Wheels, ESC/Receiver, all included. No controller, no battery or charger.
Charging the LiteHawk RUMBLER:
Your new Litehawk comes with a rechargeable 7.2V 700mAh NimH battery and has a 15 to 20 minute run time. Always have your toy turned off when not in use.
First, plug your USB charger into a power supply adapter port. The LED light will be Red without the battery plugged into it.
Now attach the battery to the USB charger, and the LED light will start blinking a Red light, indicating charging.
When the LED light on the USB charger turns off, the battery is fully charged. Charging takes about 4 hrs from a depleted state. Maybe 2.5 hrs for the very first charge out of the box.
Unplug the battery from the charger, and if you are ready to play, install into your toy. If storing, remember that all rechargeable batteries degrade over time, and need maintenance charges if left for a long storage period. Every other month or so will usually keep the battery in good working order.
Installing the Battery into the LiteHawk RUMBLER:
Until you are ready to play, always keep the RUMBLER turned off.
The battery compartment is located on the Bottom of the RUMBLER, and is opened with a Philips screw driver. With the door off, install the battery and carefully hook it up, then carefully close the battery door. It is a snug fit.
Ready to play.. Turn on the controller first, the power light will come on blinking
Now turn the RUMBLERS start switch on, and the controllers power light will turn off. The controllers power light will light up when ever you activate a control and move the RUMBLER.
LiteHawk RUMBLER Controls:
The controller has two control sticks, and the left stick controls the Forward and Backward motion or the RUMBLER. The right stick controls the direction that the RUMBLER will turn. Keep the right stick all the way to the side and it will spin in place.
Press the Right button on the top of the Controller, and the RUMBLERS wheels will lay flat. Press the Left button on the top of the Controller and the RUMBLERS wheels will return to the upright position.
Have Fun!!
