Search
815 results found for "neon"
-
-
285-428097 CRUSHER EVO - Rear Upper Control Arm 2 pieces
$4.00
The CRUSHER EVO Rear Upper Control Arms are designed to handle the many terrain obstacles that you will encounter in your playtime. Attaches to the Main Chassis, and the Rear Wheel Hub, to give lots of vertical movement for good clearance, with strength and durability to help the motor with its drive. These arms will only...
-
285-429010 B-Chassis Steering Rack
$5.00
For use with LiteHawk ACE 4x4 The steering rack comes in 2 pieces. Steering Rack Now you can remove the Steering Assembly, by removing the 2 screws from the 2 Steering Tie Rod Arms that are attached to the Wheels Steering Knuckles
-
285-429073 B-Chassis Differential Gear Pins (Internal gears)
$5.00
For use with LiteHawk ACE 4x4: This package comes with 10 pieces. Differential Gear Pins (Internal gears)
-
285-3443 BURST AUTO Blade Guards (4pcs)
$4.00
These are replacement Blade Guards for the LiteHawk BURST AUTO Made with a resilient pliable plastic to absorb any crashes and protect the Rotor Blades from damage. Easily removed to replace Blades. Rotor Blade Care Your BURST AUTO rotor blades come really well protected, by the sturdy guards that completely enclose the blades....
-
-
-
285-429106 B-Chassis RoundHead 2.5 x 20mm Machine Screws
$4.00
For use with LiteHawk ACE 4x4 RoundHead 2.5 x 20mm Machine Screws
-
285-429112 B-Chassis RoundHead 2 x 20mm Machine Screws
$4.00
For use with LiteHawk ACE 4x4 RoundHead 2 x 20mm Machine Screws
-
285-3413 FOCUS - Replacement Rotor Guards (4pcs)
$4.00
The Rotor Guards each have three pins on the bottom, and two tabs that hold them on the motor mount. To remove them, carefully lift straight up, while spreading the two tabs slightly apart. The guard will pop off. To install the Rotor Guards, position the three pins on the guard over the three holes...
-
285-3481 FREEDOM Upper Body
$4.00
This is a 1 piece tough polycarbonate Upper Body half, that protects and gives the drone a little style. LiteHawk FREEDOM- Accessing Body Halves, Motors, and ESC If you need to replace a Motor or the ESC/Receiver, you will need to do some soldering to replace them. If you need to replace an upper or...
-
-
-
285-428003 C-Chassis - Body Post (Pair)
$4.00
Body posts can be used for the front or the back of your LiteHawk CRUSHER MT. Body posts are attached to the Front and Rear Shock towers. The Body posts have multiple height ajustment holes, so you can get the ride that you want!
-
-
285-05 Litehawk 2, 3 and 4 Heli - Twin Rotor Motors
$7.00
Motors for 2, 3 and 4 Heli's - Upper and Lower Rotor Head Motors, come with pinion gears attached. These motors wiring need to be soldered in place. LITEHAWK III- Access Upper Chassis, Motors, ESC/Receiver Remove 5 Upper Chassis Side Plate Screws, and Slide off 2 plastic bushings from both sides of the Heli'. Take note...
-
-
-
-
285-427108 M Chassis - Roll Cage and Skid Plate
$15.00
LiteHawk Replacement Part can be used on RUSH 4x4. Remove the 2 screws that secure it to the Shock Tower, and the 2 screws that hold it to the Chassis bottom. Then remove. With the Rear Wing Removed, take these 4 screws out and set the Roll Cage aside. ...
