• 285-428013 C-Chassis - Rear Tie-Rods (2 pcs)

  • $4.00

Description

For LiteHawk CRUSHER MT and SCOUT -  Gear Box and Motor with access to the Rear Tie Rods:

With the Rear Wheels removed, follow above instructions to remove the Upper and Lower Suspension Arms from the Chassis only, and remove the screw holding the Upper shock to the Shock Tower, every thing can remain attached to the Wheel Hubs.

Now remove the six screws holding Rear Upper Cover or Motor Hatch, in place, and set aside.

Remove the Rear Bumper and set aside. ( Same as the Front Bumper )

Remove the remaining screws from the bottom of the Rear Chassis 

Take note of the wiring route of the Motor wires before removing.

 

Unplug the Motor from the ESC. and lift out the Motor and Gear Box Assembly. You can now remove the Rear Tie Rods from the Wheel Hubs and Lower Chassis if you need to replace them.