This is the upper body shell for the LiteHawkBURST AUTO BURST AUTO
This hard top shell will protect your Drones internal electronics from any and all crashes, and look darn good doing it to. It is attached to the lower chassis with 16 screws.
Separating The Upper Chassis from the Lower Chassis
- Begin with removing 8 screws from the lower chassis, and another 8 screws from the upper chassis
- Remove the Rotor Blade Guards as described above. Then pinch off the Rotor Blades, noting where they must return, and set aside.
- Now you can remove the 8 screws from the upper chassis.
- Lift the upper chassis away and set aside.