• 285-3404 CLICK AUTO - 2.4Ghz Controller

  • $25.00


2.4 Ghz controller for use with LiteHawk CLICK AUTO.

How to sync:

1/ Make sure the model is turned OFF and locate a flat level surface.
2/ Turn the CLICK AUTO ON. Place the CLICK AUTO on the flat surface, you must do this within five seconds of turning the power switch ON.
3/ Turn on the power for the controller.
4/ Move the left control stick (this is also the throttle stick) all the way up, then all the way down. You will hear a beep and the lights will turn solid. The model is now bound.

The CLICK AUTO MUST be on a flat surface in order to digitally self level itself, otherwise the model will not sync to the controller.