Rear Wheel Hub- 2 pieces
LiteHawk OVERDRIVE 4X4 MT Rear Upper and Lower Control Arms, and Rear Wheel Hub removal:
Remove the Rear Upper Control Arm Hinge Pin. When you do the Dog Bone/Rear Axle will fall out. If the Axle pin is removed, you can slide out the Rear Axle.
To Remove the Rear Upper Control Arm from the Rear Wheel Hub, you need to press out the Knurled pin that holds it in place.
To Remove the Rear Lower Control Arm, remove the Rear Lower Control Arm Hinge Pin. Then Press the Knurled pin that holds the Wheel Hub in place.. out, and set the Wheel Hub aside.
To remove the Wheel Bearings from the Rear Wheel Hub, just slip a small straight screw driver through the Hub and carefully push on the back of the bearing, it will pop out. Turn the Hub over and repeat for the second bearing.
Carefully Reassemble in Reverse Order.