These are the two clockwise motors needed for your LiteHawk OPTIX AUTOMAX. One for white blades and the other for the red blades.
The OPTIX does not need to have the motors soldered in place, they have a plug in end that makes repairs easy. Take careful note, or a picture of the wire routeing of the Motor that you are replacing. Carefully loosen the plug in with a small flat screw driver, by lifting at the edges until it is loose, then lift away. Don't pull on the wires, they could break. A little screwdriver for a lever at the bottom of the motor to get it started upward, and a pair of tweezers to help with the plug ins may help.