Replacement controller for LiteHawk QUATTRO RADICAL.
How To Sync:
1/ Make sure the model is turned Off and locate a flat level surface.
2/ Turn the RADICAL On. Place the RADICAL on the flate surface, you must do this within 5 seconds of turning the power switch ON. You will see flashing lights on the RADICAL start to blink.
3/ Turn on the power for the controller. You will see a flashing red LED light and audible beep indicating the power is on. In a few seconds the blinking LED on the RADICAL and the blinking LED on the controller will both be solid. The model is now bound.
The RADICAL MUST be on a flat surface in order to digitally self level itself, otherwise the model will not sync to the controller.