This is the upper body Clam shell for the LiteHawk OPTIX AUTOMAX
This hard top shell will protect your Drones internal electronics from any and all crashes, and look darn good doing it too. It is attached to the lower chassis with 19 screws.
Separating The Upper Chassis from the Lower Chassis
Begin with removing the Rotor Blade Guards as described above. Then pinch off the Rotor Blades, noting where they must return, and then set aside.
- Next remove 7 screws from the lower chassis, and another 12 screws from the upper chassis
- Lift the upper chassis away and set aside.